Weidmuller 8975640000

Approvals

• Approvals
  • CE, CULUSEX
• ROHS
  • Conform

Classifications

• eClass 10.0
  • 27-21-01-20
• eClass 9.0
  • 27-21-01-20
• eClass 9.1
  • 27-21-01-20
• ETIM 6.0
  • EC002653
• ETIM 7.0
  • EC002653

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Stripping length, rated connection
  • 7 mm
• Tightening torque, max.
  • 0.5 Nm
• Tightening torque, min.
  • 0.4 Nm
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 88.1 g
• Width
  • 17.5 mm
• Width (inches)
  • 0.689 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • typ. 0.1 %; max 0.2 %
• Configuration
  • none
• Galvanic isolation
  • Passive isolator
• Input/Output
  • 4...20 mA/ 2 x 4...20 mA
• Rail
  • TS 35
• Step response time
  • < 20 ms
• Temperature coefficient
  • ≤ 150 ppm/K
• Voltage supply
  • min. 12 V DC/ max. 30 V DC

Input

• Input current
  • 4...20 mA (current loop)
• Number of inputs
  • 1
• Voltage drop
  • 3.8 V

Insulation Coordination

• Clearance & creepage distances
  • ≥ 5.5 mm
• EMC standards
  • EN 55011, EN 61000-6
• Galvanic isolation
  • Passive isolator
• Impulse withstand voltage
  • 4 kV
• Insulation voltage
  • 4 kVeff / 5 s
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Insulation voltage input or output/supply
  • 4 kVeff / 5 s
• Pollution severity
  • 2
• Rated voltage
  • 300 V
• Surge voltage category
  • III

Output

• Cut-off frequency (-3 dB)
  • 30 Hz
• load impedance current
  • RL = (UB-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
• Number of outputs
  • 2
• Output current
  • 2 x 4...20 mA (current loop)
• Output signal limit
  • Approx. 31 mA
• Status indicator
  • Green LED

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Temperatures

• Operating temperature
  • 0 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • Standard signal splitter, output-current loop feed1-channel signal splitter in 17.5 mm width, output-current loop feed,for transmitting and isolating analogue DC current signals from 4 to 20 mA. Approved for ATEX Zone2 UL C1/ Div2 applications.Add-on housing for TS35 DIN rail installationDimensions: L/W/H 92.4/ 17.5/ 112.4 mmScrew connection / nominal cross-section 2.5 mm2Protection degree: IP 20 Input4...20 mAOutput 2 x 4...20 mALoad resistance / R = (UB-12 V) / 20 mA e.g. 600 Ohm at 20 mATransmission error < 0,1 % v. E.Auxiliary power 4...20 mA output current loopAmbienttemperature range 0°C...+55 °C Isolation EN 50178 , 2-way isolation up to 4 kV AC/DCTest voltage4 kVRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX, ATEXTypeWAS5 CCC 2OLP EX
• Short specification
  • Standard signal splitter, output-current loop feed1-channel signal splitter in 17.5 mm width, output-current loop feed,for transmitting and isolating analogue DC current signals from 4 to 20 mA. Approved for ATEX Zone2 UL C1/ Div2 applications.