Weidmuller 8705640000

Approvals

• Approvals
  • CE, CULUS, EAC
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-20
• eClass 9.0
  • 27-21-01-20
• eClass 9.1
  • 27-21-01-20
• ETIM 6.0
  • EC002653
• ETIM 7.0
  • EC002653
• UNSPSC
  • 30-21-18-01

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 96.5 mm
• Length (inches)
  • 3.799 inch
• Net weight
  • 132 g
• Width
  • 17.5 mm
• Width (inches)
  • 0.689 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Configuration
  • DIP switch and potentiometer, Alarm status reset via reset input or button
• Galvanic isolation
  • 3-way isolator
• Rail
  • TS 35
• Repeat accuracy
  • < 0.3 % of set range
• Step response time
  • < 300 ms
• Temperature coefficient
  • ≤ 250 ppm/K of measuring range
• Voltage supply
  • from the measuring circuit

Input

• Input frequency
  • 50...60Hz
• Input voltage
  • 24...70 / 70...140 / 140...210 / 210...260 V AC / DC, max. 260 V AC ⁄ DC
• Number of inputs
  • 1 x single-phase (L, N)

Insulation Coordination

• Clearance & creepage distances
  • ≥ 3 mm
• EMC standards
  • EN 61000-6-2, EN 61000-6-4
• Galvanic isolation
  • 3-way isolator
• Impulse withstand voltage
  • Input/output, input/reset input, reset input/output: 4 kV
• Insulation voltage
  • 2 kVeff
• Pollution severity
  • 2
• Rated voltage
  • input/output, input/reset input, reset input/output: 300 V
• Surge voltage category
  • III

Output (Digital)

• Alarm function
  • configurable, Surge voltage, Undervoltage, Hysteresis: 10 V
• Continuous current
  • 3 A
• Max. switching voltage, AC
  • 250 V
• Type
  • Relay, 1 CO contact

Probability Of Failure

• MTTF
  • 587 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • -10 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • -10 °C
• Storage temperature
  • -20 °C...70 °C
• Storage temperature, max.
  • 70 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • Limit-value monitoring component   for 1-phase AC / DC voltages with relay outputand electrical isolationlimit-value monitoring component in 17.5 mm width for recording AC / DCvoltages 24...70 V / 70...140 V / 140...210 V / 210...260 V.A relay contact (CO) with a switching capacity of 750 VAis available on the output side.Input ranges, high/low tripswitching behaviour, hysteresis and memory behaviour can be configured using DIP switches. Switching threshold can be adjusted with front-side potentiometerPower is supplied using the measured circuit.The memory function can be activated using an external reset input 18...30 VDC.Input/output/reset have 4 kV of electrical isolation.Add-on housing for TS35 rail mountingDimensions: L/W/H 96.5/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   Input                         24...70 V / 70...140 V / 140...210 V / 210...260 V AC/DC.                                      SwitchableVoltage of measuring circuit max 260 VOutput                                             Relay / COSwitching current 3 ASwitching voltage 6... 250 V AC / 6...60 V DCSwitching threshold 10...90 % via potentiometerHysteresis                     24...70 V switchable 5 V / 10V                                      70...260 V switchable 8 V / 16 V Temperature coefficient   < 250 ppm KStep response time        < 300 msReset input                18...30 VDC / max 700 msAmbient temperature range 0 °C...+50 °C Secure isolation                   EN 50178, 2-way isolation up to 4 kVTest voltage                                2 kVeff Input / Output / Reset inputRated voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusType                                                             WA5 VMR 1ph
• Short specification
  • Limit-value monitoring component  for 1-phase AC / DC voltages with relay output and electrical isolationlimit-value monitoring component in 17.5 mm width for recording AC / DC voltages 24...70 V / 70...140 V / 140...210 V / 210...260 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip switching behaviour, hysteresis and memory behaviour can be configured using DIP switches. Switching threshold can be adjusted using the front-side potentiometer. The input circuit is used for the power supply. The memory function can be activated using an external reset input 18...30 VDC. The input/output/reset have 4 kV of electrical isolation.