Weidmuller 8705630000

Approvals

• Approvals
  • CE, CULUS, EAC
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-20
• eClass 9.0
  • 27-21-01-20
• eClass 9.1
  • 27-21-01-20
• ETIM 6.0
  • EC002653
• ETIM 7.0
  • EC002653
• UNSPSC
  • 30-21-18-01

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 96.5 mm
• Length (inches)
  • 3.799 inch
• Net weight
  • 120.6 g
• Width
  • 22.5 mm
• Width (inches)
  • 0.886 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Configuration
  • DIP switch and potentiometer, Alarm status reset via reset input or button
• Galvanic isolation
  • 3-way isolator
• Rail
  • TS 35
• Repeat accuracy
  • < 0.3 % of set range
• Step response time
  • < 300 ms
• Temperature coefficient
  • ≤ 300 ppm/K
• Voltage supply
  • from the measuring circuit

Input

• Input frequency
  • 50...60Hz
• Input voltage
  • 80…250 V AC/DC 3~, 200...400 V AC/DC
• Number of inputs
  • 1 x three-phase (R, S, T, N)

Insulation Coordination

• Clearance & creepage distances
  • Output circuit: 1.8 mm; input circuit, output circuit 1/output circuit 2: 3 mm; input/output: 5.5 mm
• EMC standards
  • EN 61000-6-1, 2, 3, 4
• Galvanic isolation
  • 3-way isolator
• Impulse withstand voltage
  • 6 kV
• Insulation voltage
  • 4 kVeff / 1 min.
• Pollution severity
  • 2
• Rated voltage
  • 600 V
• Surge voltage category
  • III

Output (Digital)

• Alarm function
  • configurable, Surge voltage, Undervoltage, Hysteresis: 10 V
• Continuous current
  • 3 A
• Max. switching voltage, AC
  • 250 V
• Type
  • 2 CO contacts

Probability Of Failure

• MTTF
  • 493 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • 0 °C...50 °C
• Operating temperature, max.
  • 50 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -25 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -25 °C

Tender Specification Sheets

• Long specification
  • Limit-value monitoring component   for 1- /3- phase AC and DC voltageswith relay output and electrical isolationlimit-value monitoring component in 22.5 mm width for recording 1-phaseAC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V.A relay contact (CO) with a switching capacity of 750 VAis available on the output side.Input ranges, high/low trip alarm, monitored voltage window andswitching behaviour (for working and quiescent currents) can be configured using DIP switchesSwitching threshold can be adjusted with front-side potentiometerPower is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.Add-on housing for TS35 rail mountingDimensions: L/W/H 96.5/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   Input                         3 phases 80 V...250 V AC                                      1 phase 200...400 V AC/DC                                      switchableVoltage of measuring circuit max 400 VOutput                                             Relay / COSwitching current 3 ASwitching voltage 6... 250 V AC / 6...60 V DCSwitching threshold via potentiometerVoltage window        small 10 % AC / 20 % DC // large 12 % AC / 25 % DC adjustableHysteresis 5 % AC / 6 % DC of inputTemperature coefficient   < 300 ppm KStep response time        < 300 msAmbient temperature range 0 °C...+50 °C Secure isolation                   EN 50178, 2-way isolation up to 6 kVTest voltage               4 kVeff / 1 min. Input / OutputRated voltage                                          600 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusType                                                             WA5 VMR 3ph
• Short specification
  • Limit-value monitoring component   for 1- /3- phase AC and DC voltageswith relay output and electrical isolationlimit-value monitoring component in 22.5 mm width for recording 1-phaseAC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V.A relay contact (CO) with a switching capacity of 750 VAis available on the output side.Input ranges, high/low trip alarm, monitored voltage window andswitching behaviour (for working and quiescent currents) can be configured using DIP switchesSwitching threshold can be adjusted with front-side potentiometerPower is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.