Weidmuller 8581200000

Approvals

• Approvals
  • CE, CULUS, EAC
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-20
• eClass 9.0
  • 27-21-01-20
• eClass 9.1
  • 27-21-01-90
• ETIM 6.0
  • EC002653
• ETIM 7.0
  • EC002653
• UNSPSC
  • 31-12-10-07

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Stripping length, rated connection
  • 7 mm
• Tightening torque, max.
  • 0.5 Nm
• Tightening torque, min.
  • 0.4 Nm
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 131 g
• Weight
  • 100 g
• Width
  • 17.5 mm
• Width (inches)
  • 0.689 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • 0.3 % of output range
• Configuration
  • DIP switch, Potentiometer
• Current-carrying capacity of cross-connect.
  • ≤ 2 A
• Galvanic isolation
  • 3-way isolator
• Power consumption
  • max. 1.9 W at IOUT = 20 mA
• Rail
  • TS 35
• Step response time
  • typ. < 200 ms
• Temperature coefficient
  • ± 250 ppm/K of output range
• Voltage supply
  • 24 V DC ± 20 %

Input

• Bridge supply voltage
  • +10 V, +5 V, 4.8...10.2 V; offset adjustable; max. 40 mA
• Input measurement range
  • 0…10 mV, 0…20 mV, 0…50 mV, 0…100 mV, 0…200 mV, 0…500 mV, -10…+10 mV, -20…+20 mV, -50…+50 mV, -100…+100 mV, -200…+200 mV, -500…+500 mV
• Input resistance, voltage
  • > 1 MΩ
• Number of inputs
  • 1
• Sensor
  • Resistance measuring bridge

Insulation Coordination

• Clearance & creepage distances
  • ≥ 3 mm
• EMC standards
  • EN 61000-6 /-2
• Galvanic isolation
  • 3-way isolator
• Impulse withstand voltage
  • 4 kV
• Insulation voltage
  • 2 kVeff / 5 s
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Insulation voltage input or output/supply
  • 2 kVeff / 5 s
• Pollution severity
  • 2
• Rated voltage
  • 300 V
• Surge voltage category
  • III

Output

• load impedance current
  • ≤ 600 Ω
• load impedance voltage
  • ≥ 1 kΩ
• Number of outputs
  • 1
• Offset current
  • max. 100 µA
• Offset voltage
  • max. 0.05 V
• Output current
  • 0...20 mA, 20...0 mA, 4...20 mA, 20...4 mA
• Output voltage, note
  • 0...5 V, 5...0 V, 10...0 V, 0...10 V
• Status indicator
  • Green LED
• Wire break detection
  • Output: 0 V or 0/4 mA

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • 0 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • Bridge measuring transformer with electrical 3-way isolation, configurablemeasurement isolating transformer in 17.5 mm width with external power supply, for recording, transforming and isolating of measurements from industrial strain gauges. Standard DC current/voltage signals are available on the output side. Input voltage range - 500...+ 500 mV can be configured with DIP switches. Bridge excitation can be switched between 5 V and 10 V, or adjustable from 4.8 to 10.2 V. I/O signals can be configured via DIP switches. I/O circuit is electrically isolated from the 24-VDC supply Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm²Protection degree: IP 20 Input Resistance measuring bridge / 1 mV / V... 5 mV / V Bridge sensitivity -500 mV...+ 500 mV switchable in 12 rangesInput resistance > 1 MOhm Bridge supply 5 V /10 V / 4.8....10, V Output 0...5 V / 0...10 V/ 0(4)...20 mA also inverseLoad resistance 1 kOhm/ voltage Temperature coefficient typ. 250 ppm / KTransmission errortyp. 0.3 % of input< 600 Ohm/ Strom //>Step response time Auxiliary power24 VDC +/- 25 %Ambient temperature range 0...55 °C Isolation EN 50178, 3-way isolation up to 4 kV of all circuits against each other Test voltage2 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus Type WAS5 PRO Bridge
• Short specification
  • Bridge measuring transformer with 3-way electrical isolation, configurablemeasurement isolating transformer in 17.5 mm width with external power supply, for recording, transforming and isolating measurements from industrial strain gauges. Standard DC current/voltages signals are available on the output side. Input voltage range - 500...+ 500 mV can be configured with DIP switches. Bridge excitation can be switched between  5 V and 10 V or adjustable of  4.8...10.2 V. I/O signals can be configured via DIP switches. The I/O circuit is electrically isolated from the 24-VDC supply.