Weidmuller 8581180000

Approvals

• Approvals
  • CE, CULUS, CULUSEX, EAC
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-28
• eClass 9.0
  • 27-21-01-28
• eClass 9.1
  • 27-21-01-28
• ETIM 6.0
  • EC002918
• ETIM 7.0
  • EC002918

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Stripping length, rated connection
  • 7 mm
• Tightening torque, max.
  • 0.5 Nm
• Tightening torque, min.
  • 0.4 Nm
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 118.7 g
• Width
  • 12.5 mm
• Width (inches)
  • 0.492 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • < 0.2% of output range
• Configuration
  • DIP switch (measurement range 0...15900 Hz), Frequency generator (measurement range 0...100 kHz)
• Current-carrying capacity of cross-connect.
  • ≤ 2 A
• Galvanic isolation
  • 3-way isolator
• Input/Output
  • configurable
• Power consumption
  • max. 1.6 W at IOUT = 20 mA
• Rail
  • TS 35
• Step response time
  • 360 ms + 2 times the period time of input frequency
• Temperature coefficient
  • max. 200 ppm/K of output range
• Voltage supply
  • 24 V DC ± 25 %

Input

• Input frequency
  • 0…100kHz, adjustable
• Number of inputs
  • 1
• Rated input level
  • Threshold/hysteresis: Namur: approx. 1.7 mA/approx. 0.2 mA; NPN: approx. 6.5 V/approx. 0.2 V; PNP: approx. 6,7 V/approx. 0.5 V
• Sensor
  • 2-, 3-wire PNP/NPN, Namur initiator, push-pull step, Frequency
• Sensor supply
  • 16 V DC @ max. 15 mA

Insulation Coordination

• Clearance & creepage distances
  • ≥ 5.5 mm
• EMC standards
  • EN 55011, EN 61000-6, EN 61326
• Galvanic isolation
  • 3-way isolator
• Impulse withstand voltage
  • 6 kV
• Insulation voltage
  • 4 kVeff / 5 s
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Insulation voltage input or output/supply
  • 4 kVeff / 5 s
• Pollution severity
  • 2
• Rated voltage
  • 300 V
• Surge voltage category
  • III

Output

• load impedance current
  • ≤ 600 Ω
• load impedance voltage
  • ≥ 1 kΩ
• Number of outputs
  • 1
• Offset current
  • max. 100 µA
• Offset voltage
  • max. 0.05 V
• Output current
  • 0...20 mA, 4...20 mA, Adjustable
• Output voltage, note
  • 0...5 V, 0...10 V, Adjustable
• Status indicator
  • Green LED

Probability Of Failure

• MTTF
  • 458 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • 0 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • Measurement isolating transformer for frequency signals, configured with DIP switchesf/DC measurement isolating transformer in 12.5 mm width, with external power supply:for transmitting, converting and isolating frequencies up to 100 kHz. Namur or 3-wire NPN/PNP sensors can be connected on the input side.  Standard DC signals 0(4) to 20 mA/ 0 to 10 V are available on the output side.Internal potentiometer is used for zero and span calibrations.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 12.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20  Input                         2-, 3-wire PNP/ NPN, Namur initiators, push-pull                                      up to 100 kHz                                                                                                                                                      Output                                             0/4...20 mA                                      0...10 V Load resistance             < 600 Ohm/ Strom/> 1 kOhm/ voltageTransmission error             <0.2 % of inputAuxiliary power                                     24 VDC +/- 25 %Power loss approx. 1.6 WAmbient temperature range 0°C...+55 °CIsolation                                 EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage                               2 kV input against output against auxiliary powerRated voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEXType                                                             WAS4 PRO Freq
• Short specification
  • Measurement isolating transformer for frequency signals, configured with DIP switchesf/DC measurement isolating transformer in 12.5 mm width, with external power supply:for transmitting, converting and isolating frequencies up to 100 kHz. Namur or 3-wire NPN/PNP sensors can be connected on the input side.   Standard DC signals 0(4) to 20 mA/ 0 to 10 V are available on the output side. Internal potentiometer is used for zero and span calibrations.