Weidmuller 8560730000

Approvals

• Approvals
  • CE, CULUSEX, EAC, GERMLLOYD
• ROHS
  • Conform

Classifications

• eClass 10.0
  • 27-21-01-29
• eClass 9.0
  • 27-21-01-29
• eClass 9.1
  • 27-21-01-29
• ETIM 6.0
  • EC002919
• ETIM 7.0
  • EC002919
• UNSPSC
  • 31-12-10-07

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 1.5 mm²
• Stripping length, rated connection
  • 7 mm
• Type of connection
  • Tension-clamp connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 132 g
• Width
  • 17.5 mm
• Width (inches)
  • 0.689 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • Type K & J: -150°C…1200°C ±(3°C + 0,1% of range), Type T: -150°C…400°C ±(3°C + 0,1% of range), Type E: -150°C…1000°C ±(3°C + 0,1% of range), Type N: -150°C…1300°C ±(3°C + 0,1% of range), Type R & S: 200°C…1760°C ±(6°C + 0,1% of range), Type B: 500°C…1820°C ±(6°C + 0,1% of range)
• Configuration
  • DIP switch
• Current-carrying capacity of cross-connect.
  • ≤ 2 A
• Galvanic isolation
  • 3-way isolator
• Input/Output
  • configurable
• Linearity
  • Yes
• Power consumption
  • 800...850...950 mW at IOUT = 20 mA
• Rail
  • TS 35
• Step response time
  • without filter: max. 1.4 s; with filter: max. 7.5 s
• Voltage supply
  • 24 V DC ± 20 %

Input

• Line resistance in measuring circuit
  • 50 Ω
• Number of inputs
  • 1
• Sensor
  • Thermo element (IEC 584) type: K,J,T,E,N,R,S,B
• Temperature input range
  • -200...+1820 °C

Insulation Coordination

• Clearance & creepage distances
  • ≥ 3 mm
• EMC standards
  • EN 55011, EN 61000-6
• Galvanic isolation
  • 3-way isolator
• Impulse withstand voltage
  • 4 kV
• Insulation voltage
  • 2 kVeff / 5 s
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Insulation voltage input or output/supply
  • 2 kVeff / 5 s
• Pollution severity
  • 2
• Rated voltage
  • 300 V
• Surge voltage category
  • III

Output

• cold junction compensation
  • Yes
• Fine adjustment
  • ± 5% (switchable)
• load impedance current
  • ≤ 600 Ω
• load impedance voltage
  • ≥ 1 kΩ
• Number of outputs
  • 1
• Offset current
  • max. 100 µA
• Offset voltage
  • max. 0.05 V
• Output current
  • 0...20 mA, 4...20 mA
• Output voltage, note
  • 0...10 V
• Status indicator
  • Module active: LED on/ wire breakage: LED flashing/Error: LED off
• Wire break detection
  • LED flashing (output value: > 20 mA, >10 V)

Probability Of Failure

• MTTF
  • 270 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Temperatures

• Operating temperature
  • 0 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • TC temperature measurement isolating transformer; configured with DIP switches TC- temperature measurement isolating transformer in 17.5 mm width with external power supply,for transmitting thermocouples (insulated version) types K, J, T, E, N, R, S and B according to IEC 584. Standard DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Internal cold-junction compensationPotentiometer is used for zero and span calibrations.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 17.5/ 112.4 mmTension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20  Input                         TC Type Type K, J, T, E, N, R, S                                                                                                                                                      Output                                             0/4...20 mA                                       0...10 V Load resistance             < 600 Ohm/ Strom/> 1 kOhm/ voltageTransmission error             0.2...0.3 0.8 % of input (depending on TC Type)Auxiliary power                                   24 VDC +/- 25 %Power loss approx. 0.9 WAmbient temperature range 0°C...+55 °C Isolation                                EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage                               2 kV input against output against auxiliary powerRated voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEXType                                                             WAZ5 PRO Thermo
• Short specification
  • TC temperature measurement isolating transformer; configured with DIP switches TC- temperature measurement isolating transformer in 17.5 mm width with external power supply,for transmitting thermocouples (insulated version) types K, J, T, E, N, R, S and B according to IEC 584. Standard DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Internal cold-junction compensation Potentiometer for zero/span compensation