Weidmuller 8463580000

Approvals

• Approvals
  • CE, CSA, CULUS, CULUSEX, DNV GL
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-20
• eClass 9.0
  • 27-21-01-20
• eClass 9.1
  • 27-21-01-20
• ETIM 6.0
  • EC002653
• ETIM 7.0
  • EC002653
• UNSPSC
  • 31-12-10-07

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Stripping length, rated connection
  • 7 mm
• Tightening torque, max.
  • 0.5 Nm
• Tightening torque, min.
  • 0.4 Nm
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 153 g
• Width
  • 17.5 mm
• Width (inches)
  • 0.689 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • < 0.1 % of end value
• Configuration
  • none
• Galvanic isolation
  • Passive isolator
• Input/Output
  • 0(4)...20 mA/0(4)...20 mA (2-channel)
• Rail
  • TS 35
• Temperature coefficient
  • ≤ 50 ppm/K of final value
• Voltage supply
  • via the input measuring circuit

Input

• Input current
  • 0(4)...20 mA current loop
• Number of inputs
  • 2
• Pick-up current
  • < 100 µA
• Voltage drop
  • Approx. 3 V at RL = 0 Ω; approx. 13 V at RL = 500 Ω; (IIN =20 mA)

Insulation Coordination

• Clearance & creepage distances
  • ≥ 5.5 mm
• EMC standards
  • EN 55011, EN 61000-6
• Galvanic isolation
  • Passive isolator
• Impulse withstand voltage
  • 6 kV
• Insulation voltage
  • 4 kVeff / 1 s
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Pollution severity
  • 2
• Rated voltage
  • 300 V
• Surge voltage category
  • III

Output

• load impedance current
  • ≤ 500 Ω
• Number of outputs
  • 2
• Output current
  • 0...20 mA, 4...20 mA

Probability Of Failure

• MTTF
  • 1,049 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • -25 °C...70 °C
• Operating temperature, max.
  • 70 °C
• Operating temperature, min.
  • -25 °C
• Storage temperature
  • -40 °C...80 °C
• Storage temperature, max.
  • 80 °C
• Storage temperature, min.
  • -40 °C

Tender Specification Sheets

• Long specification
  • Standard signal passive isolator two-channel, input-loop powered2-channel signal passive isolator in 17.5 mm width with input current loop feed,for transmitting and isolating analogue DC current signals from 0/4 to 20 mA Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/17.5/ 112.4 mm Screw connection /nominal cross-section2.5 mm²Protection degree: IP20 Input2 x 0/4 to 20 mA Output 2 x 0/4 to 20 mA Voltage drop approx. 3 V at RL 0 Ohm, 13 V at RL = 500 Ohm (20 mA)Load resistance Transmission error Auxiliary power 0/4...20 mA Input current loopAmbient temperature range -25 °C...+70 °CIsolation EN 50178 , 2-way isolation up to 4 kV AC/DCTest voltage6 kVRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX, CSA, GLType WAS5 CCC-LP 0-20/0-20mA
• Short specification
  • Standard signal passive isolator two-channel, input-loop powered2-channel signal passive isolator in 17.5 mm width with input current loop feed,for transmitting and isolating analogue DC current signals from 0/4 to 20 mA