Weidmuller 8461470000

Approvals

• Approvals
  • CE, EAC
• ROHS
  • Conform

Classifications

• eClass 10.0
  • 27-21-01-28
• eClass 9.0
  • 27-21-01-28
• eClass 9.1
  • 27-21-01-28
• ETIM 6.0
  • EC002918
• ETIM 7.0
  • EC002918
• UNSPSC
  • 31-12-10-07

Connection Data

• Clamping range, max.
  • 1.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 1.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), max.
  • 1.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min.
  • 0.5 mm²
• Type of connection
  • Tension-clamp connection
• Wire connection cross section AWG, max.
  • AWG 16
• Wire connection cross section AWG, min.
  • AWG 26
• Wire connection cross section, finely stranded, max.
  • 1.5 mm²
• Wire connection cross-section, finely stranded, min.
  • 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
  • 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
  • 0.5 mm²
• Wire cross-section, finely stranded, max. (AWG)
  • AWG 16
• Wire cross-section, finely stranded, min. (AWG)
  • AWG 26
• Wire cross-section, solid, max.
  • 1.5 mm²
• Wire cross-section, solid, min.
  • 0.5 mm²

Dimensions And Weights

• Depth
  • 63.2 mm
• Depth (inches)
  • 2.488 inch
• Length
  • 91 mm
• Length (inches)
  • 3.583 inch
• Net weight
  • 28.4 g
• Width
  • 6 mm
• Width (inches)
  • 0.236 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • 0.2 % v. FSR
• Configuration
  • DIP switch
• Current-carrying capacity of cross-connect.
  • ≤ 20 A
• Current consumption
  • 14 mA without load
• Galvanic isolation
  • between input ⁄ output ⁄ supply
• Input/Output
  • DC/ f
• Rail
  • TS 35
• Temperature coefficient
  • ≤ 250 ppm/K
• Voltage supply
  • 24 V DC ± 10 %

Input

• Input resistance, voltage
  • 100 kΩ
• Input voltage
  • 0...10 V
• Number of inputs
  • 1

Insulation Coordination

• Clearance & creepage distances
  • ≥ 1.5 mm
• EMC standards
  • EN 55011, EN 61000-6
• Galvanic isolation
  • between input ⁄ output ⁄ supply
• Impulse withstand voltage
  • 1.5 kV
• Insulation voltage
  • 1 kV DC
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Pollution severity
  • 2
• Rated voltage
  • 100 V
• Surge voltage category
  • III

Output

• load impedance current
  • ≤ 600 Ω
• Number of outputs
  • 1
• Output current
  • max. 20 mA
• Output frequency
  • 0...1/ 4/ 8/ 16 kHz
• Output level
  • PNP, Ub-0.7 V
• Status indicator
  • LED, pulsing

Temperatures

• Operating temperature
  • 0 °C...50 °C
• Operating temperature, max.
  • 50 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • DC/f converter for converting a 0...10 V standard signal to 0...1/ 4/ 8/ 16 kHz, configured with DIP switchesDC/f converter in 6 mm width with external power supply for transmitting and converting a 0...10 V standard signal into a proportional  0...1/ 4/ 8/ 16 kHz rectangular frequency. The input and output circuits are electrically isolated. Add-on housing for TS35 rail mounting Dimensions: L/W/H 91/ 6/ 63.2 mm Tension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20  Input                             0...10 VOutput                                                 0...1 kHz/ 4 kHz/ 8 kHz/ 16 kHz                                           PNP: UB - 0.7V / max. 20 mATransmission error                  < 0,2 % v. E. Temperature coefficient       < 250 ppm KAuxiliary power                                         24 V DC +/- 10 % Ambient temperature range 0°C...+50 °C Isolation                                    1.5 kV Rated voltage 100 V  Overvoltage category III pollution degree 2 Type                                                                MCZ VFC 0-10V
• Short specification
  • DC/f converter for converting a  0...10 V standard signal to 0...1/ 4/ 8/ 16 kHz, configured with DIP switchesDC/f converter in 6 mm width with external power supply, for transmitting and converting a 0...10 V standard signals into a proportional 0...1/ 4/ 8/ 16 kHz rectangular frequency. The input and output circuits are electrically isolated.