Weidmuller 8447280000

Approvals

• Approvals
  • CE, CSA, CULUS, CULUSEX
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-20
• eClass 9.0
  • 27-21-01-20
• eClass 9.1
  • 27-21-01-20
• ETIM 6.0
  • EC002653
• ETIM 7.0
  • EC002653
• UNSPSC
  • 31-12-10-07

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Stripping length, rated connection
  • 7 mm
• Tightening torque, max.
  • 0.5 Nm
• Tightening torque, min.
  • 0.4 Nm
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 135 g
• Width
  • 17.5 mm
• Width (inches)
  • 0.689 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Accuracy
  • < 0.2 % of end value
• Configuration
  • none
• Current-carrying capacity of cross-connect.
  • ≤ 2 A
• Galvanic isolation
  • 3-way isolator
• Input/Output
  • 4...20 mA/ 0...10 V
• Power consumption
  • < 1.3 W @ IOUT = 5 mA
• Rail
  • TS 35
• Step response time
  • ≤ 40 µs (typ. 30 µs)
• Temperature coefficient
  • ≤ 250 ppm/K of final value
• Voltage supply
  • 24 V DC ± 25 %

Input

• Input current
  • 4...20 mA
• Input resistance, current
  • 50 Ω
• Number of inputs
  • 1

Insulation Coordination

• Clearance & creepage distances
  • ≥ 3 mm
• EMC standards
  • EN 55011, EN 61000-6
• Galvanic isolation
  • 3-way isolator
• Impulse withstand voltage
  • 4 kV
• Insulation voltage
  • 1.2 kVeff / 5 s
• Insulation voltage input or output/rail
  • 4 kVeff / 1 min.
• Insulation voltage input or output/supply
  • 1.2 kVeff / 5 s
• Pollution severity
  • 2
• Rated voltage
  • 300 V
• Surge voltage category
  • III

Output

• Cut-off frequency (-3 dB)
  • ≥ 15 kHz (typ. 20 kHz)
• load impedance current
  • ≤ 600 Ω
• load impedance voltage
  • ≥ 2 kΩ
• Number of outputs
  • 1
• Output voltage, note
  • 0...10 V

Probability Of Failure

• MTTF
  • 488 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • 0 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • Standard signal isolating converter1-channel signal isolating converter in 17.5 mm width with external power supply,for transmitting and isolating analogue DC current signals 4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   Input                         4...20 mAOutput                                             0...10 VTransmission error             < 0,2% v. E. Limit frequency 20 kHzAuxiliary power                                     24 VDC +/- 25 %Power loss approx. 1.3 WAmbient temperature range 0 °C...+55 °CSecure isolation                   EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage                               4 kV input against output against auxiliary powerRated voltage                                           300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX, CSAType                                                             WAS5 CVC HF 4-20/0-10V
• Short specification
  • Standard signal isolating converter1-channel signal isolating converter in 17.5 mm width, with external power supply, for transmitting and isolating analogue DC current signals from 0 to 20 mA