Weidmuller 8432300000

Approvals

• Approvals
  • CE, CSA, CULUS, EAC
• ROHS
  • Conform
• UL File Number Search
  • E141197

Classifications

• eClass 10.0
  • 27-21-01-29
• eClass 9.0
  • 27-21-01-29
• eClass 9.1
  • 27-21-01-29
• ETIM 6.0
  • EC002919
• ETIM 7.0
  • EC002919

Connection Data

• Clamping range, max.
  • 2.5 mm²
• Clamping range, min.
  • 0.5 mm²
• Clamping range, rated connection
  • 2.5 mm²
• Stripping length, rated connection
  • 7 mm
• Tightening torque, max.
  • 0.5 Nm
• Tightening torque, min.
  • 0.4 Nm
• Type of connection
  • Screw connection

Dimensions And Weights

• Depth
  • 112.4 mm
• Depth (inches)
  • 4.425 inch
• Length
  • 92.4 mm
• Length (inches)
  • 3.638 inch
• Net weight
  • 78.2 g
• Width
  • 12.5 mm
• Width (inches)
  • 0.492 inch

Environmental Product Compliance

• REACH SVHC
  • Lead 7439-92-1

General Data

• Configuration
  • DIP switch
• Current-carrying capacity of cross-connect.
  • ≤ 2 A
• Current consumption
  • < 38 mA @ IOUT = 20 mA
• Galvanic isolation
  • 2-way isolator
• Input/Output
  • Thermocouple type: K, J, T, E, N, R, S, B / 0(4)...20 mA; 0...10 V
• Linearity
  • Yes
• Rail
  • TS 35
• Step response time
  • without filter: 1.1 s; with filter: 6 s
• Temperature coefficient
  • ± (200 ppm from the span + 0.075 K)/K
• Voltage supply
  • 24 V DC ± 20 %

Input

• Number of inputs
  • 1
• Sensor
  • Thermo element (IEC 584) type: K,J,T,E,N,R,S,B
• Temperature input range
  • -200...+1820 °C

Insulation Coordination

• EMC standards
  • EN 55011, EN 61000-6
• Galvanic isolation
  • 2-way isolator

Output

• cold junction compensation
  • Yes
• load impedance current
  • ≤ 500 Ω
• Number of outputs
  • 1
• Offset current
  • max. 100 µA
• Offset voltage
  • max. 0.05 V
• Output current
  • 0...20 mA, 4...20 mA
• Output voltage, note
  • 0...10 V
• Status indicator
  • Module active: LED on/ wire breakage: LED flashing/Error: LED off
• Wire break detection
  • LED flashing (output value: > 20 mA, >10 V)

Probability Of Failure

• MTTF
  • 317 Years

Product Information

• Product information
  • This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Ratings Iecex/Atex/Cul

• Certificate no. (cULus)
  • E141197

Temperatures

• Operating temperature
  • 0 °C...55 °C
• Operating temperature, max.
  • 55 °C
• Operating temperature, min.
  • 0 °C
• Storage temperature
  • -20 °C...85 °C
• Storage temperature, max.
  • 85 °C
• Storage temperature, min.
  • -20 °C

Tender Specification Sheets

• Long specification
  • TC temperature measuring transformer; configured with DIP switchesTC- temperature measuring transformer in 12.5 mm width with external power supply,for transmitting thermocouples (insulated version) types K, J, T, E, N, R, S and B according to IEC 584. Standard DC signals 0(4) to 20 mA/ 0 to 10 V are available on the output side.Internal cold-junction compensationInternal potentiometer is used for zero and span calibrations.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 12.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20  Input                         TC Type Type K, J, T, E, N, R, S                                                                                                                                                      Output                                             0/4...20 mA                                      0...10 V Load resistance             < 500 Ohm/ Strom/> 1 kOhm/ voltageTransmission error              0.2...0.3 0.8 % of input (depending on TC Type)   Temperature coefficient +/- (200 ppm of end value + 0.075 K)/KAuxiliary power                                     24 VDC +/- 20 °Power loss approx. 0.7 WAmbient temperature range 0°C...+55 °C Ratedvoltage                                         300 VAC/DC at overvoltage category III and pollution degree 2Approvals cULus, CSAType                                                             WTS4 THERMO
• Short specification
  • TC temperature measuring transformer; configured with DIP switchesTC- temperature measuring transformer in 12.5 mm width with external power supply,for transmitting thermocouples (insulated version) types K, J, T, E, N, R, S and B according to IEC 584. Standard DC signals 0(4) to 20 mA/ 0 to 10 V are available on the output side.Internal cold-junction compensationInternal potentiometer is used for zero and span calibrations.