Fluke i3000 Flex 4PK
Description
Fluke i3000 Flex 4PK is now available new, surplus, and used from Williams Automation.
If you need a specific firmware or series relating to this item, please call or email us with your request.
We can also provide specifications and/or a data sheet for this item upon request. Please call or email us if you require one.
Please note we offer UPS Next Day Air shipping for all orders. Please be sure to select next day shipping at checkout, and we will provide same-day shipment.
Call (803) 761-7027 if you have any questions about availability, or email us at sales@williamsautomation.com.
Electrical Specifications
- Accuracy
- at +25°C
- ±1% of range (45 Hz to 65 Hz)
- Current ranges
- AC rms
- 3000 A
- 300 A
- 30 A
- External field
- ±1% of range
- with cable > 200 mm from the head
- Frequency range
- 10 Hz to 50 kHz (-3 dB)
- Linearity
- ±0.2% of reading
- 10% to 100% of range
- Load impedance
- 100 kΩ minimum
- Noise
- 8 mV AC rms (30 A)
- 2 mV AC rms (300 A, 3000 A)
- Output sensitivity (AC-coupled)
- 1 mV per A
- 10 m
- 100 mV
- Phase error
- < ±1° (45 Hz to 65 Hz)
- ±10° (at 20 kHz)
- Position sensitivity
- with cable > 25 mm from the coupling
- ±2% of range
- Power supply
- 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply
- Temperature coefficient
- ±0.08% of reading per °C
- Working voltage
- see safety standards section
- 600 V AC rms or DC
General Specifications
- Cable length (head to electronics)
- 2 m (6.56 ft)
- EMC standards
- EN 61326: 1998 +A1, A2, and A3
- Head bend radius
- 38.1 mm (1.5in)
- Head cable diameter
- 14.3 mm (0.56in)
- Head circumference
- 610 mm (24in)
- Maximum conductor size
- 610 mm or 914 mm, depending on model
- Operating humidity
- 15% to 85% (non-condensing)
- Operating temperature range
- -20°C to +85°C (-4°F to 185°F) (electronics)
- -20°C to +90°C (-4°F to 190°F) (head)
- Output connection
- 0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
- Safety standards
- 600 Vrms, Category III, Pollution Degree 2
- BS EN 61010-2-032: 2002
- BS EN 61010-031: 2002
- BS EN 61010-1: 2001
- Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz
- Strong temperature range
- -40°C to +105°C (-40°F to 221°F) (head)
- -20°C to +85°C (-4°F to 185°F) (electronics)
- Weight
- 180 g (0.396 lb) (head)
- 190 g (0.419 lb) (electronics)