Tripp Lite UT750UL

Battery

• Battery Charge
  • 11A / 45A (selectable)
• Battery Pack Accessory (Optional)
  • 98-121 sealed lead acid battery (optional)
• DC System Voltage (VDC)
  • 12
• Expandable Battery Runtime
  • Runtime is expandable with any number of user supplied wet or gel or AGM type Batteries.
• Expandable Runtime
  • Yes

Certifications

• Certifications
  • Tested to UL 458 (USA) and CSA (Canada)

Environmental

• Relative Humidity
  • 0-95% non-condensing

Input

• Input Connection Type
  • DC INPUT: Set of two DC bolt-down terminals. AC INPUT: NEMA 5-15R input plug
• Input Cord Length Details
  • DC INPUT: User supplies cabling. 6 gauge or larger (see manual) AC INPUT: attached 6ft. AC line cord with plug.
• Maximum Input Amps / Watts
  • DC INPUT: Full continuous load of 73A at 12 VDC. AC INPUT 29 amps at 120 VAC with full inverter and charger load (9.3A max charger only / combined input load to support charger and AC output is automatically controllable to 66% - 33% - 0% based on AC)
• Nominal Input Voltage(s) Supported
  • 120V AC
• Recommended Electrical Service
  • DC INPUT: Requires 12VDC input source capable of delivering 73A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended.
• Voltage Compatibility (VAC)
  • 120
• Voltage Compatibility (VDC)
  • 12

Line / Battery Transfer

• High Voltage Transfer to Battery Power
  • In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases to 145V (user adjustable to 145 - see manual)
• Low Voltage Transfer to Battery Power
  • In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105 - see manual)
• Transfer Time (Line Power to Battery Mode)
  • 16.6 milliseconds (typical -compatible with many computers, servers and networking equipment-verify transfer time compatibility loads for UPS applications)

Output

• Continuous Output Capacity (Watts)
  • 750
• Frequency Compatibility
  • 60 Hz
• Nominal Output Voltage(s) Supported
  • 120V
• Outlet Details
  • 2 NEMA 5-15R GFCI protected outlets
• Output Frequency Regulation
  • 60 Hz (+/- 0.3Hz)
• Output Receptacles
  • (2) 5-15R
• Output Voltage Regulation
  • LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%)
• Output (Watts)
  • 750
• Overload Protection
  • Includes 10A input breaker dedicated to the charging system and 12A output breaker for AC output loads.
• Peak Output Capacity (Watts)
  • 1500
• Pure Sine Wave Output
  • No

Overview

• UPC Code
  • 037332124401

Physical

• Cooling Method
  • Multi-speed fan
• Form Factors Supported
  • Mounting slots enable permanent placement of inverter on any horizontal surface. (see manual for additional mounting information)
• Material of Construction
  • Polycarbonate
• Receptacle Color
  • White
• Shipping Dimensions (hwd / in.)
  • 12.60 x 10.70 x 10.70
• Shipping Weight (lbs.)
  • 20.20
• Unit Dimensions (hwd / in.)
  • 7 x 8.75 x 9
• Unit Weight (lbs.)
  • 17.4

Special Features

• Load Sensing
  • Load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level.

Surge / Noise Suppression

• AC Suppression Joule Rating
  • 450

User Interface, Alerts & Controls

• Front Panel LEDs
  • Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences
• Switches
  • 3 position on / off remote switch enables simple on / off power control plus "auto/ remote"

Warranty

• Product Warranty Period (U.S. & Canada)
  • 30-month limited warranty