Tripp Lite UT2012UL
Estimated Delivery between and with free shipping.
Overnight shipping is also available.
Description
Tripp Lite UT2012UL is now available new, surplus, and used from Williams Automation.
If you need a specific firmware or series relating to this item, please call or email us with your request.
We can also provide specifications and/or a data sheet for this item upon request. Please call or email us if you require one.
Please note we offer UPS Next Day Air shipping for all orders. Please be sure to select next day shipping at checkout, and we will provide same-day shipment.
Call (803) 761-7027 if you have any questions about availability, or email us at sales@williamsautomation.com.
Battery
- Battery Charge
- 15A / 60A (selectable)
- Battery Pack Accessory (Optional)
- 98-121 sealed lead acid battery (optional)
- DC System Voltage (VDC)
- 12
- Expandable Battery Runtime
- Runtime is expandable with any number of user supplied wet or gel or AGM type batteries
- Expandable Runtime
- Yes
Certifications
- Certifications
- Tested to UL 458 (USA) and CSA (Canada)
Environmental
- Relative Humidity
- 0-95% non-condensing
Input
- Input Connection Type
- DC INPUT: set of two (2) DC bolt-down terminals. AC INPUT: NEMA 5-15R GFCI input plug
- Input Cord Length Details
- DC INPUT: User supplies cabling. 6 gauge or larger (see manual) AC INPUT: attached 6ft. AC line cord with plug
- Nominal Input Voltage(s) Supported
- 120V AC
- Recommended Electrical Service
- DC INPUT: Requires 12VDC input source capable of delivering 192A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended.
- Voltage Compatibility (VAC)
- 120
- Voltage Compatibility (VDC)
- 12
Line / Battery Transfer
- High Voltage Transfer to Battery Power
- In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases 135V (user adjustable to 145 -see manual)
- Low Voltage Transfer to Battery Power
- In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105 -see manual)
- Transfer Time (Line Power to Battery Mode)
- 16.6 milliseconds (typical -compatible with many computers, servers and networking equipment -verify transfer time compatibility loads for UPS applications)
Output
- Continuous Output Capacity (Watts)
- 2000
- Frequency Compatibility
- 60 Hz
- Nominal Output Voltage(s) Supported
- 120V
- Outlet Details
- 2 NEMA 5-15R GFCI protected outlets
- Output Frequency Regulation
- 60 Hz (+/- 0.3Hz)
- Output Nominal Voltage
- 120V
- Output Receptacles
- (2) 5-15R
- Output Voltage Regulation
- LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%)
- Output (Watts)
- 2000
- Overload Protection
- Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC output loads
- Pure Sine Wave Output
- No
Overview
- UPC Code
- 037332123565
Physical
- Cooling Method
- Multi-speed fan
- Form Factors Supported
- Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
- Material of Construction
- Polycarbonate
- Receptacle Color
- White
- Shipping Dimensions (hwd / in.)
- 12.80 x 14.40 x 19.60
- Shipping Weight (lbs.)
- 46.20
- Unit Dimensions (hwd / in.)
- 7.25 x 8.5 x 16.25
- Unit Weight (lbs.)
- 40.6
Surge / Noise Suppression
- AC Suppression Joule Rating
- 600
User Interface, Alerts & Controls
- Front Panel LEDs
- Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences
- Switches
- 3 position on / off remote switch enables simple on / off power control plus "auto/ remote"
Warranty
- Product Warranty Period (U.S. & Canada)
- 30-month limited warranty