Tripp Lite SMART3000SLT

Battery

• Battery Access
  • Battery access door
• Battery Recharge Rate (Included Batteries)
  • Less than 4.5 hours from 10% to 90% (typical, full load discharge)
• Battery Replacement Description
  • Hot-swappable, user replaceable batteries
• DC System Voltage (VDC)
  • 48
• Expandable Runtime
  • No
• Full Load Runtime (min.)
  • 3.5 min. (2250w)
• Half Load Runtime (min.)
  • 9 min. (1125w)
• Internal UPS Replacement Battery Cartridge
  • RBC54

Certifications

• UPS Certifications
  • Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

Communications

• Communications Cable
  • USB and DB9 cabling included
• Communications Interface
  • USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
• Network Management Cards
  • SNMPWEBCARD ; WEBCARDLX ; RELAYIOCARD
• Network Monitoring Port Description
  • Supports detailed monitoring of UPS and site power conditions
• PowerAlert Software
  • For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
• WatchDog Compatibility
  • Supports Watchdog application, OS and hard-reboot restart options for remote applications

Environmental

• AC Mode BTU / Hr. (Full Load)
  • 320
• AC Mode Efficiency Rating (100% Load)
  • 96%
• Audible Noise
  • Audible Noise < 50 dBA at Front Side 1 Meter
• Battery Mode BTU / Hr. (Full Load)
  • 1251
• Operating Temperature Range
  • +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
• Relative Humidity
  • 0 to 95%, non-condensing
• Storage Temperature Range
  • +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Input

• Input Circuit Breakers
  • 30A
• Input Phase
  • Single-Phase
• Nominal Input Voltage(s) Supported
  • 120V AC
• Rated input current (Maximum Load)
  • 20A
• Recommended Electrical Service
  • 30A 120V
• UPS Input Connection Type
  • L5-30P
• UPS Input Cord Length (ft.)
  • 10

Line / Battery Transfer

• High Voltage Transfer to Battery Power (Setpoint)
  • 145
• Low Voltage Transfer to Battery Power (Setpoint)
  • 83
• Transfer Time
  • 2-4 milliseconds

Output

• Frequency Compatibility
  • 60 Hz
• Individually Controllable Load Banks
  • No
• Nominal Output Voltage(s) Supported
  • 110V; 115V; 120V
• Nominal Voltage Details
  • 120v nominal output in battery mode
• Output AC Waveform (AC Mode)
  • Sine wave
• Output AC Waveform (Battery Mode)
  • Pure Sine wave
• Output Circuit Breakers
  • 20A branch rated (x2) - each breaker protects 3 5-15/20R outlets, L5-30R is unbreakered
• Output kVA Capacity (kVA)
  • 3
• Output kW Capacity (kW)
  • 2.25
• Output Receptacles
  • (6) 5-15/20R; (1) L5-30R
• Output Voltage Regulation (Battery Mode)
  • +/- 5%
• Output Voltage Regulation (Line Mode)
  • -18% / +8%
• Output Volt Amp Capacity (VA)
  • 3000
• Output Watt Capacity (Watts)
  • 2250
• Power Factor
  • 0.8

Overview

• UPC Code
  • 037332125767
• UPS Type
  • Line-Interactive

Physical

• Cooling Method
  • Fan
• Primary Form Factor
  • Tower
• Primary UPS Depth (mm)
  • 318
• Primary UPS Height (mm)
  • 267
• Primary UPS Width (mm)
  • 226
• Shipping Dimensions (hwd / in.)
  • 15.30 x 17.80 x 13.70
• Shipping Weight (lbs.)
  • 75.50
• UPS Housing Material
  • Steel
• UPS Power Module Dimensions (hwd, in.)
  • 10.5 x 8.9 x 12.5
• UPS Power Module Weight (kg)
  • 25.85
• UPS Power Module Weight (lbs.)
  • 57

Special Features

• Cold Start (Startup in Battery Mode During a Power Failure)
  • Cold-start operation supported
• Green Energy-Saving Features
  • Greater than 95% efficiency - GREEN UPS
• High Availability UPS Features
  • Hot swappable batteries

Surge / Noise Suppression

• EMI / RFI AC Noise Suppression
  • Yes
• UPS AC Suppression Joule Rating
  • 570
• UPS AC Suppression Response Time
  • Instantaneous

User Interface, Alerts & Controls

• Alarm Cancel Operation
  • Power-fail alarm can be silenced using alarm-cancel switch
• Audible Alarm
  • Audible alarm indicates power failure and overload conditions
• LED Indicators
  • 9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for load and battery charge level
• Switches
  • 2 Switches control off/on power status and alarm-cancel/self-test operation

Voltage Regulation

• Overvoltage Correction
  • Input voltages between 127 and 145 are reduced by 12%
• Severe Undervoltage Correction
  • Input voltages between 83 and 95V are boosted by 24%
• Undervoltage Correction
  • Input voltages between 96 and 108V are boosted by 12%
• Voltage Regulation Description
  • Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145

Warranty

• Connected Equipment Insurance (U.S., Canada & Puerto Rico)
  • $250,000 Ultimate Lifetime Insurance
• Product Warranty Period (Worldwide)
  • 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.