ProSoft PLX32-EIP-PND

Environmental

• Current Load
  • 10 to 36 VDC @ 610 mA maximum
  • 24 VDC nominal @ 300 mA
• Dimensions (H x W x D)
  • 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
• Ethernet Ports (2)
  • Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
  • 10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
• Operating Temperature
  • -25°C to 70°C (-13°F to 158°F)
• Power Supply
  • Positive, Negative, GND Terminals
  • 24 VDC nominal
  • 10 to 36 VDC allowed
• Relative Humidity
  • 5% to 95% RH with no condensation
• Shipped With Each Unit
  • 5’ straight-through Ethernet cable
  • ProSoft Solutions DVD
  • J180 Power Connector
  • 2.5 mm screwdriver
• Shock
  • IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
  • IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operation)
• Storage Temperature
  • -40°C to 80°C (-40°F to 176°F)
• Vibration
  • IEC 60068-2-6; 5G @ 10Hz to 150Hz

EtherNet/IP Specifications

• CIP Services Supported
  • 0x4D - CIP Data Table Write
  • 0x4C - CIP Data Table Read
• Class 3 Client Connections
  • Unconnected - 1
  • Connected - 2
• Command List
  • Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
• Command Sets
  • PLC-2/PLC-3/PLC5 Basic Command Set
  • SLC500 Command Set
  • PLC5 ASCII Command Set
  • PLC5 Binary Command Set
• I/O connection sizes in/out
  • 496/496 bytes
• Max RPI time
  • 5 ms per connection
• Number of Class 1 I/O Connections
  • 8
• Number of Class 3 Server Connections
  • 5
• Supported Message Types
  • PCCC and CIP
• Supported PLC Types
  • PLC2, PLC5, SLC, CLX, CMPLX, MICROLX

PROFINET Specifications

• Driver Type
  • Class A Device
• Exchange Types
  • Cyclic Real-time (RT) and Acyclic Data
• PROFINET I/O Data
  • 1440 bytes IN, 1440 bytes OUT