Description
ProSoft Technology ILX56-MM is now available new, surplus, and used from Williams Automation.
If you need a specific firmware or series relating to this item, please call or email us with your request.
We can also provide specifications and/or a data sheet for this item upon request. Please call or email us if you require one.
Please note we offer UPS Next Day Air shipping for all orders. Please be sure to select next day shipping at checkout, and we will provide same-day shipment.
Call (803) 761-7027 if you have any questions about availability, or email us at sales@williamsautomation.com.
Specifications
- Configuration Data
- Can be saved offline or saved to the on board compact flash card.
- Configuration Utility
- Contains built-in Help functions. On-Line configuration only
- Data Transfers
- Transfer data between up to 16 individually-configurable communications Interface connections
- Interfaces
- Choose RA, Modbus TCP/IP, or Siemens IE protocol for each Interface
- Internal Date and Time
- Can be set manually or synchronized with ControlLogix or CompactLogix. The frequency of synchronization can be: No frequency, Hourly, Daily, Every 8 hours, or Every 12 hours.
- Protocols Supported
- Modbus TCP/IP and Siemens Industrial Ethernet supported via the built-in Ethernet ports. EtherNet/IP, ControlNet, Data Highway+ (DH+) and Data Highway 485 (DH485) are supported through Rockwell Automation (RA) 1756 communications bridge modules.
- Security
- No login required to view configuration information. Must log in to make configuration changes. PROJECT-level users may make configuration changes and start/stop data transfer operations (i.e. switch between RUN and IDLE). ADMINISTRATOR-level users may make Project -level changes as well as assign usernames, passwords, and security access levels for all users.
- Setup Mode
- Setup Mode temporarily sets the Message Manager network port settings to their default values. Setup Mode also allows you to reset the default administrative password.
- Tags
- Browse and use tag names from any RA PAC in a ControlLogix local or remote chassis or any Allen-Bradley PLC or RA PAC connected across supported bridged networks. Create user-defined Tags for Modbus and Siemens data addresses.
- Transfer Lists
- Create data exchange lists using source and destination Tags
- Triggers
- Define events that will cause one or more Transfer Lists to be executed. Triggers can be based on Tag values or scheduled time intervals.