Fluke-i310s

Electrical Characteristics

• Accuracy (at +23°C) (300 A range)
  • ±1% of reading ±300 mA
• Accuracy (at +23°C) (30 A range)
  • ±1% of reading ±50 mA
• AC rms or DC
  • ±45 A and 450 A
• Bandwidth to meet accuracy specification
  • 1 kHz
• Battery life
  • 30 Hours, low battery indicator
• Conductor position sensitivity
  • ±1.5% relative to centre reading
• Current ranges
  • 30 A and 300 A AC rms or ±45 A and 450 A DC
• Frequency range (small signal)
  • DC to 20 kHz (-3 dB)
• Inrush current
  • 600A AC rms MAX
• Load impedance
  • > 10 k Ohms and ≤100 pF
• Measuring ranges
  • ±45 A and 450 A DC
• Output sensitivity
  • 10 mV/A (30 A) || 1 mV/A (300 A)
• Phase shift below 1 kHz
  • < 2 degrees || < 2°
• Power supply
  • 9 V Alkaline, MN1604/PP3
• Resolution
  • ±50 mA (30 A) || ±100 mA (300 A)
• Temperature coefficient
  • ±0.1% of reading / °C
• Working voltage (see Safety Standards section)
  • 300 V AC rms or DC

General Characteristics

• Cable length
  • 2 metres
• EMC Compatibility
  • IEC 61326-1: Portable Electromagnetic Environment
• Maximum conductor size
  • 19 mm diameter
• Operating humidity
  • 15% to 85% (non-condensing)
• Operating temperature range
  • -10 to +50°C
• Output connection
  • Safety BNC connector || Supplied with safety 4mm adaptor
• Output zero
  • Manual adjust via thumbwheel
• Safety
  • IEC 61010-1, Pollution Degree 2 || IEC 61010-2- 032: CAT III 300V || Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
• Storage temperature range (with battery removed)
  • -20 to +85°C
• Weight
  • 250 g