The DCH401-5-CYC is a modified version of our for cycling applications. It is designed to cycle the motor between two limit switches. There are two modes; JOG and CYCLE. In JOG mode, there are two pushbuttons, jog forward and jog reverse. The motor will run in the commanded direction until the corresponding limit switch is activated. In CYCLE mode, the motor will run forward when the start pushbutton is closed until it activates the forward limit switch, then reverse until it activates the reverse limit switch. The drive is programmed for only one cycle when the start pushbutton is closed, but keeping a maintained closed pushbutton will cause the drive to continuously cycle. The DCH series combines an AC to DC switching power supply with a regenerative PWM drive, creating an all in one solution to applications requiring control of 12 or 24 VDC motors when only 115 or 230 VAC power is available. The microprocessor design allows the drive to be programmed for custom applications or routines to meet an OEMs needs. With an isolated front end, this series is compatible with a 0-5 or 0-10 VDC analog from any PLC and with it's 8-bit on-board microprocessor, the DCH can be customized in many applications to even replace a PLC.DCH Series DCH401-5-CYC Cycling Controls

American Control Electronics DCH401-5-CYC is now available new, surplus, and used from Williams Automation.

If you need a specific firmware or series relating to this item, please call or email us with your request.

We can also provide specifications and/or a data sheet for this item upon request. Please call or email us if you require one.

Please note we offer UPS Next Day Air shipping for all orders. Please be sure to select next day shipping at checkout, and we will provide same-day shipment.

Call (803) 761-7027 if you have any questions about availability, or email us at sales@williamsautomation.com.